if you have a Qnap QuTScloud that won’t take dhcp network or there’s a dhcp on network, the only way to start first setup is to login into shell and setup it manually by this step:<\/p>\n
1 – default user shell login is: root<\/p>\n
2 – first password user is: MAC ADDRESS of network without “:” and all CAPITAL letters<\/p>\n
3 – setup the ip with this command: ifconfig eth0 IP netmask IP (where “eth0” is the name of interface and “IP” in the numbers format that you need to setup)<\/p>\n
4 – setup the gateway by: ip route add default gw IP ( where “IP” is the numbers of the gateway )<\/p>\n
5 – add DNS resolver hosts ( 1 is sufficient ) : echo “nameserver 8.8.8.8” >> \/etc\/resolv.conf<\/p>\n
6 – check if all good by this commands :\u00a0 ip addr (show you the ip and subnet of all network interfaces)<\/p>\n
6 – cat \/etc\/resolv.conf to show if dns records is write succeffully.<\/p>\n
Now we have the correct setup of Network card and we can start finally the first setup by https:\/\/ipaddressofvnas<\/p>\n
<\/p>\n
bye bye<\/p>\n
<\/p>\n
<\/p>\n","protected":false},"excerpt":{"rendered":"
if you have a Qnap QuTScloud that won’t take dhcp network or there’s a dhcp…<\/p>\n