first Step for change Qnap ADMIN Password is press for 3 second the backside reset button.<\/p>\n\n\n\n
If Administrator have disable it by setting on Qts interface follow the second Metod. It reset the admin password without lost any data on Qnap NAS.<\/p>\n\n\n\n
<\/p>\n\n\n\n
SECOND METOD Step by Step:<\/p>\n\n\n\n
Shutdown NAS
Remove all disks
Power on without disks (keep removed)
wait for NAS boot-up, It take 3min
Hotplug all disks
Connect to NAS only by SSH using default user and password ( admin \/ admin )<\/p>\n\n\n\n
Once connected at NAS by SSH run this command one at once:<\/p>\n\n\n\n
storage_util -sys_startup
storage-util -sys_startup_p2
mount \/dev\/md13 \/mnt\/ext
passwd ( at answer insert new password, repeat two time)
reboot<\/p>\n\n\n\n
Wait For Complete NAS reboot and enter on it by WEBPAGE, change from it the admin password. <\/p>\n\n\n\n <\/p>\n\n\n\n Bye Bye<\/p>\n","protected":false},"excerpt":{"rendered":" first Step for change Qnap ADMIN Password is press for 3 second the backside reset…<\/p>\n
( THIS PASSWORD CHANGE IS VERY IMPORTANT, IF DON’T COMPLETE THIS STEP YOU HAVE TO REPEAT ALL FROM 1 POINT)<\/span>
<\/p>\n\n\n\n